Up one level Top index page » probe
probe


Previous page At last page 33-44 (of 44 found)
View of the top hat, heat exchange rings and neck baffles of probe C, prior to dewar insertion. Technicians at Lockheed carefully install the dozens of valves that make up the probe's Probe C wrapped and ready for transport into FISTOPs. Early prototype quartz block with metal sleeves placed in the gyroscope bores. This was the complete Science Instrument Assembly (SIA) just after completion. All 4 gyroscopes and the telescope have been integrated within the quartz block A prototype quartz block on a black background. A prototype quartz block. This view is looking up at the base of the block, with the fixturing flanges protruding from the sides. An early version of the Science Instrument Assembly (SIA) being assembled in the class 100 clean room. View of Probe C's top hat, after insertion into the flight dewar. Looking up at the end of the probe as it is positioned in place. The lower rings will hold the vacumn can that the probe will be slid into. Looking down into window 3 of the probe. This was part of the thermal repair work performed on the probe April 13th, 2000

This album has 331 items in total    |    Album was updated 12/5/07 4:12 PM    |    Generated by JAlbum 7.3, custom skin ExhibitPlus 1.5